Pirelli Diablo Rosso Pair Tires 120/70/15 + 160/60/15 Yamaha Tmax 530 Dot18

  
Pirelli Diablo Rosso tires Pair 120/70/15 + 160/60/15 yamaha t max 530 dot18. This product page has been automatically translated.

If you have questions, feel free to contact us. Pair of tires Pirelli Diablo Rosso 120/70/15 + 160/60/15 yamaha t max 530 dot18. Pirelli Diablo Rosso sc, dowry second half of 2018. we are always ready to solve your problems.

Maximum availability before and after the sale. To check compatibility, send a pair of booklet.

Contact us before buying to check actual availability of the desired amount. We are a company that operates in the sector for over 50 years.

Diameter rim - 15 marca - Pirelli amount - 2 typology - scooter speed index - h max 210 km / h - summer. How to read an interpretation tire markings tires: to find all the basic information about a tire simply read the information below 1 tire balancing unbalanced tires cause vibration, which in turn can lead to driver fatigue and premature and uneven wear of the tire, and the wear of the vehicle's suspension. Tires should be balanced during assembly or when repositioned after maintenance. Balancing the tires should be checked as soon as the first signs of vibration.

2 tire pressure is very important to check your tire pressure at least once a month using a manometer. Incorrect inflation, in fact, can cause an abnormal and excessive wear and consequent lacerations that can, in turn, result in overheating of the tire, excessive consumption of fuel or even the tire bursting.

Make sure you check the pressure when the tires are cold and have not been used recently. Even if you are browsing a kilometer, the tire pressure increases and correct measurement is compromised. Continuous loss of inflation pressure indicates a potential problem of assembly of the tire or wheel. In this case, contact a specialized tire dealer.

3 tire repair tires should be repaired by specialists specialized tires. The correct repair procedure is to remove the tire from the rim, to check the damage and to apply the fungus over the patch for repairing punctures that fall within the limits of repairability guidelines.

4 tire rotation although many are able to rotate the tires themselves, the best way, the quickest and safest to do is to trust the professionals. The procedure and correct planning to spin the tires are given in the vehicle manual. If no schedule is specified, it is recommended to turn all 8 000 to 10 000 km. 5 wheel alignment can be said that a vehicle is properly aligned when all steering components and suspensions are secured and that the tires and the wheels are properly positioned. If there is uneven wear of the tread, it is possible that the wheels are misaligned, and therefore, it is necessary to consult a specialist.

Tire Type defines the intended use of the tire. P (usa only) indicates that this is a car tire. Lt (United States only) indicates that this is a truck tire. Width tire width measured in millimeters from one side to the other. The width of the tire is 215 mm. Percentage report aspect ratio between the height and the width of the tire section. 65 indicates that the height is 65% of the width of the tire.

Construction This indication how the tire was assembled. R indicates that it is a radial tire. These layers of textile cords form the structure of the tire and are disposed radially from one bead to the other.

B indicates that the tire has a bias ply structure, that is to say that the son of the folds extend diagonally along the tire bead heel, the fiber layers being arranged in alternating directions to obtain a larger building. Diameter of the wheel width of the wheel from one end to another.

The wheel diameter is 15 inches. Load index indicates the maximum load that a tire is able to withstand when it is inflated. The maximum load in pounds and kilograms is also indicated elsewhere on the tire sidewall. Speed ​​category indicates the maximum speed capabilities of the tire.

H indicates that the tire has a maximum service speed of 210 km / h. This data relates only to the speed relative to the tire and do not constitute an invitation to exceed the speed limits set by law; you should always drive within the speed limits.

Alongside this indication is a tire identification or serial number, comprised of an alphanumeric combination of 12 characters. UTQG it is an abbreviation of \For more information on UTQG, see the \Care instructions for the tires: 1 to check the tire tread regularly check the tread on your tires to decide if you need to replace them. All tires for passenger cars, light and medium commercial vehicles are equipped with built-in wear in the tread indicators. These indicators are positioned at the base of the grooves of the tread, in different positions along the tire. When the residual tread reaches the level of the ribs closer to the tread, the tire has a step wear which requires replacement.

If the wear of the tread is more pronounced than one or two points, it means that the tire has been properly inflated. Some of the most common signs of uneven wear in the tread and their causes 1.1 blocks and rolling grooves: parts carried relaxation is more common in the front tires, but can also occur in the rear tires. This may indicate that the wheels are not balanced properly or suspension or some components of the car's steering system are worn. 1.2 edge serrated: misalignment the edges of the tread they appear jagged or otherwise worn? This is due to an incorrect slip on the road surface. To solve the problem, it is necessary to adjust the convergence of the car.

Depth correct sculpture is essential to ensure proper performance of the tires. If you notice any differences or loss of traction on wet surfaces, it may be that there is not enough tread on the tires. When the tread depth is reduced to 1.6 mm, the tire must be replaced. 1.3 Central wear: excess pressure if a tire is over-inflated, the center of the tread bears most of the load and wears faster than the side edges.

Uneven wear reduces the useful life of a tire. Excessive tire wear may also be due to misalignment or mechanical problems. 1.4 wear on both sides: insufficient pressure if the tire looks like this, it has perhaps not been sufficiently inflated. Insufficient pressure reduces the life of the tread due to a greater wear of the outer parts (or shoulders) of the tire. This condition also causes excess heat, which reduces the life of the tire. Finally, there is also an increase in fuel consumption due to the increase of the rolling resistance (the soft tires bring the vehicle under greater pressure). 2 balance the unbalanced tires tires cause vibration, which in turn can lead to fatigue and premature and uneven wear of the tire, and the wear of the vehicle's suspension. 3 tire pressure is very important to check your tire pressure at least once a month using a manometer. 4 Repair tires tires should be repaired by specialists specialized tires. 5 tire rotation although many are able to rotate the tires themselves, the best way, the quickest and safest to do is to trust the professionals. 6 wheel alignment can be said that a vehicle is properly aligned when all steering components and suspensions are secured and that the tires and the wheels are properly positioned.

Instructions for assembly of the rim general indications the applications mentioned in the technical catalog are purely indicative, given the speed and continuity of development of the various components brake calipers, steering geometry, mudguards, fenders, etc. Assembling the tires check the wheel does not need to be mounted upside down. Use tire proportional to the width of the rim alloy. Use tires, even if they are lowered, proportionate to the originals. Wheel fixing the car tighten the screws / nuts in reverse order or crossed.

Carefully follow all the instructions in the \ The tightening torque of the screws or nuts on the car plate should be strictly as indicated by the car manufacturer of the motor vehicle or, alternatively, and if present, following the guidance documents accompanying the wheel set. Recheck torque after 500 km. The proper threading between nuts and bolts, the wheel and the car is carried out if the number of revolutions that the nut / screw should be performed for a complete clamping is equal to or greater than 6, regardless of the pitch of nuts and bolts.

Check that the original key provided with the car is compatible with the hardware supplied with the wheel. Shock the material used for the construction of alloy wheels is an aluminum-alloy ¬ - silicon particularly with excellent elongation characteristics. In case of collision, the tire must be removed to check for any damage suffered. Check: only the eccentricity of the wheel remained in the 0.50 mm authorized; b the presence of turns may cause air leakage or, in severe cases, trigger breaks. Any kind of intervention (mechanical or otherwise) to restore the integrity of the wheel is strictly prohibited and excludes warranty claims.

Care and maintenance of the wheels 1 to maintain the brightness and color of the unchanged wheel, follow the regular cleaning rules: never wash the wheels when they are hot. Washing hot wheels can severely damage the painted surface of your new wheels. 2 dirt and brake dust that accumulates on the wheel surface must be eliminated each week washing the wheels with warm water and mild soap using a soft sponge. The road dust traps moisture and may damage the painted surface if left for long. Brake dust is very corrosive and abrasive and can damage the painted surface of the wheel.

3 the wheels must be dried after washing, using a soft cloth. 4 Never use abrasive sponges or scouring pads. 5 Never use cleaners tires, they contain harmful chemicals to the surface of the wheels. If you wash your car in an automatic car wash, be sure first that no chemicals are used that could damage the finish of the wheels.

6 if a specific detergent for alloy wheels is used (it must be at neutral pH and diluted in water) never let it act on the wheel for more than two minutes. Immediately rinse with water wheel.

7 does not use acid or alkaline cleaners, solvents, diluents, oils, naphtha. Diesel, gasoline, benzene, kerosene, methyl alcohol, hydraulic oil. Courier shipments depending on the area and type of goods (sda, gls, brt and others).

We personally guarantee the goods shipped: if they arrive damaged or lost, we send immediately a new package or process the refund if a replacement is not available. For goods damaged in transit, delivery must be accepted with reserve. The goods are delivered to the courier on the same business day you made the purchase for payments credited before 13:00, unless the goods are not available. Delivery time 2-4 business days.

Front: 120/70/15 rear 56h: 67h 160/60/15 marca - Pirelli amount - 2 typology - Motorbike - summer how to read a tire 2 tire pressure 4 tire rotation type of tire width Construction diameter aspect ratio wheel speed category index charging dot UTQG shock assembly check tires: how to read a tire read a tire type of tire width aspect ratio of building load index wheel diameter class speed dot UTQG maintenance check tire assembly of shock: payments. H: max 210 km / h. The item ires, air \ tire chambers, air chambers, tubes \The seller is \This item can be shipped to the following countries: Europe.

1. type: Scooter <\/ li>
2. Speed ​​index: h: max 210 km / h <\/ li>
3. brand: Pirelli <\/ li>
4. manufacturer part number: not applicable <\/ li> <\/ Ul>